TP-Link TD-8817 manual ADSL2/2+ Ethernet/USB Router User Guide

TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

4.4.3.3. IP Address Mapping

Choose “Advanced Setup→NAT”, select Multiple in Number of IPs. Click IP Address Mapping, then you can configure the Address Mapping Rule in Figure 4-20. The IP Address Mapping is for those VCs that configured with multiple IPs. The IP Address Mapping rule is per-VC based (only for Multiple IPs' VCs).

Figure 4-19

Figure 4-20

¾Rule Index: Select the Address Mapping Rule index for this VC. You can specify 8 rules in maximum.

¾Rule Type: There are four types, one-to-one, Many-to-One, Many-to-Many Overload and Many-to-Many No-overload.

¾Local Start & End IP: Enter the local IP Address you plan to mapped to. Local Start IP is the starting local IP address and Local End IP is the ending local IP address. If the rule is for all local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.

¾Public Start & End IP: Enter the public IP Address you want to do NAT. Public Start IP is the starting public IP address and Public End IP is the ending public IP address. If you have a dynamic IP, enter 0.0.0.0 as the Public Start IP.

¾Address Mapping List: This displays the information about the Mapping addresses.

28