TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.4.9.2 QoS Classification
This section will guide you to create a traffic class rule to classify the upstream traffic, assign
queue which defines the precedence and the interface and optionally overwrite the IP header
DSCP byte.
A rule consists of a class name and at least one condition below. All of the specified conditions in
this classification rule must be satisfied for the rule to take effect.
Figure 4-45
Click the Add button Figure 4-45, and you can configure the QoS on the next screen.
Figure 4-46
After you specify the condition, click Save/Apply to save the entry.
4.4.10 Bandwidth Control Choose “Advanced Setup”Æ“Bandwidth Control” and then you will see the screen as shown in
Figure 4-47. This page allows you to enable this function and to configure the value of Total
Upstream/Downstream Bandwidth.
47