TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
¾ Enable PPP Debug Mode: Select this option to debug the PPP function and you can see
many PPP log information in the System Log. Only PPP has this debug Mode.
¾ Bridge PPPoE Frames Between WAN and Local Ports: Select this option to start PPP
connection in your local PC.
¾ Enable IGMP Multicast Proxy: IGMP (Internet Group Management Protocol) is used to
manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote
configuration for client devices, such as the router. The default value is disabled, and if you are
not sure, please contact your ISP or just leave it.
5. Select a preferred wan interface as the system default gateway in Figure 4-9 and click Next.
Figure 4-9
6. Configure the DNS Server Addresses on the screen below and click Next.
Figure 4-10
¾ Select DNS Server Interface from available WAN Interfaces: You can select this option to
automatically get DNS server information from the selected WAN interface.
¾ Use the following Static DNS IP Address: You can select this option to manually enter the
primary and /or optional secondary DNS server IP addresses provided by your ISP.
) Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
22