TP-Link TL-ER6020 5.4.3 sys, TP-LINK # sys reboot This command will reboot system, Continue?Y/N

5.4.3 sys

The sys command is used for system management, including Backup and Restore, Factory Default, Reboot, Firmware Upgrade and so on.

TP-LINK # sys reboot

This command will reboot system, Continue?[Y/N]

TP-LINK # sys restore

This command will restore system, Continue?[Y/N]

TP-LINK # sys export config

Server address: [192.168.1.101]192.168.1.100

Username: [admin]ftp

Password: [admin]ftp

File name: [config.bin]

Reboot the system. Y means YES, N means NO.

Restore to factory default. Y means YES, N means NO.

Export the configuration file.

Example: There is a FTP server with IP address of 192.168.1.100 and both the user name and password of which is ftp. To save the current configuration file with the default name as config.bin to this FTP server, follow the configuration on the left.

Try to save the configuration file < config.bin > ...

Save configuration file < config bin > succeed, file size is 7104 bytes.

Note:

●FTP service is required for importing or exporting configuration files and system upgrade. The parameter Server address is the IP address of the host to provide FTP service, Username/Password is the Username/Password to login the FTP service and File name is the name of the configuration file (change the file name if the configuration file with the same name is existed).

●The parameters in the brackets are default setting and you can enter the actual parameters behind them. Press Enter key directly if there are no changes.

●TL-ER6020 connects to the FTP server using port 21 by default.

-153-