TP-Link TL-ER6020 manual  Napt,  Nat-Dmz,  One-to-One NAT

The following items are displayed on this screen:

NAPT

Source Port Range: Enter the source port range between 2049 and 65000, the span of which

must be not less than 100.

NAT-DMZ

NAT-DMZ:Enable or disable NAT-DMZ. NAT DMZ is a special service of NAT

application, which can be considered as a default forwarding rule. When NAT DMZ (Pseudo DMZ) is enabled, all the data initiated by external network falling short of the current connections or forwarding rules will be forwarded to the preset NAT DMZ host.

Host IP Address: Enter the IP address of the host specified as NAT DMZ server.

3.3.1.2One-to-One NAT

On this page, you can configure the One-to-One NAT.

Choose the menu Advanced→NAT→One-to-One NAT to load the following page.

Figure 3-30 One to One NAT

The following items are displayed on this screen:

One-to-One NAT

Mapping IP Address: Enter the Original IP Address in the first checkbox and Translated

IP Address in the second checkbox. TL-ER6020 allows mapping from LAN port to WAN port and DMZ in LAN Mode.

-46-