-29-
Default Gateway: Displays the IP address of the default gateway assigned by your
ISP.
Note:
To ensure the BigPond connection re-established normally, please restart the connection at least 5
seconds after the connection is off.
3.1.4 LAN

3.1.4.1 LAN

On this page, you can configure the parameters for LAN port of this router.
Choose the menu NetworkLANLAN to load the following page.
Figure 3-12 LAN
The following items are displayed on this screen:
LAN
IP Address: Enter the LAN IP address of the Router. 192.168.0.1 is the
default IP address. The Hosts in LAN can access the Router
via this IP address. It can be changed according to your
network.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Note:
If the LAN IP address is changed, you must use the new IP address to log into the Router. To
guarantee a normal communication, be sure to set the Gateway address and the Subnet Mask of the
Hosts on the LAN to the new LAN IP address and the Subnet Mask of the Router.

3.1.4.2 DHCP

The Router with its DHCP (Dynamic Host Configuration Protocol) server enabled can automatically
assign an IP address to the computers in the local area network.