-65-
Choose the menu Advanced→Routing→Static Route to load the following page.
Figure 3-43 Static Route
The following items are displayed on this screen:
Static Route
Destination: Enter the destination host the route leads to.
Subnet Mask: Enter the Subnet Mask of the destination network.
Next Hop: Enter the gateway IP address to which the packet should be sent next.
Interface: Select the physical network interface, through which this route is
accessible.
Metric: Defines the priority of the route. The smaller the value is, the higher the
priority is. The default value is 0. It is recommended to keep the default
value.
Description: Give a description for the entry.
Status: Activate or inactivate the entry.
List of Rules
You can view the information of the entries and edit them by the Action buttons.