-60-
Figure 3-39 Configuration
With the box before Enable Application Optimized Routing checked, the Router will consider the
source IP address and destination IP address of the packets as a whole and record the WAN port they
pass t And then the packets with the same source IP address and destination IP address or
destination port will be forwarded to the recorded WAN port. This feature is to ensure the
the box before Enable Bandwidth Based Balance Routing and select the WAN port below,
Load Balance of the specified WAN port will be enabled automatically if no routing rules are set.
.
hrough.
multi-connected applications to work properly.
Check
Then click the <Save> button to apply
Note:
The WAN ports not connecting to the Internet don’t support Intelligent Balance, please do not select
them.
3.3.4.2 Policy Routing Policy Routing provides an accurate way to control the routing based on the policy defined by the
network administrator.
Choose the menu Advanced→Load Balance→Policy Routing to load the following page.
Figure 3-40 Policy Routing