TL-MR3020 Portable 3G/4G Wireless N Router
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs are located on the front panel (View from top to bottom).
Name Status Indication
On Power is on.
Power
Off Power is off.
On The router is connected to the Internet, but there is no data being
transferred.
Flashing The router is transferring data.
Internet
Off The router is not connected to the Internet.
On The Wireless function is enabled.
Flashing There is data being transferred through wireless.
WLAN
Off The Wireless function is disabled.
On A device is linked to the corresponding port but there is no activity.
Flashing The Ethernet port is transferring data.
RJ45
Ethernet
Off No device is linked to the corresponding port.
Table 1-1 The LEDs description
¾ WPS/RESET: To use WPS function, please push the button for less than 5 seconds, and
then the WPS LED will flash; to reset the router, please push the button for at
least 10 seconds.
-4-