TP-Link TL-MR3020 3.2 WISP Mode

TL-MR3020 Portable 3G/4G Wireless N Router

Figure 3-8 Quick Setup – Finish

) Note:

After the rebooting, please reconnect to the network according to 3.1.2 Connect to Network. If

Wireless Security is enabled, you need to enter the password you’ve just set to successfully

finish the connecting.

3.2 WISP Mode

The default IP address of the Portable 3G/4G Wireless N Router is 192.168.0.254 and the

default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this

guide, we all use the default values for description.

Here we take Wireless Network Connection as an example. (You can also go to Local Area

Connection to configure the PC for wired network connection, and then configure the router. If

you need instructions as to how to do this, please refer to Appendix B: "Configuring the PC.")

1. For Windows XP, please go to Start → Settings → Control Panel → Network and

Internet Connections → Network Connections; for Windows 7, please go to Start →

Settings → Control Panel → View network status and tasks → Manage network

connection. Right click Wireless Network Connection, and select Properties.

2. For Windows XP, double click Internet Protocol (TCP/IP) in the item list; for Windows 7,

double click Internet Protocol Version 4 (TCP/IPv4).

3. Select “Obtain an IP address automatically” and “Obtain DNS server address

automatically”. Click OK to finish the settings.

1. Click the icon at the bottom of your desktop.

2. Click “Refresh network list”, and then select the network. Click Connect.

) Note:

The default SSID of the network is TP-LINK_POCKET_3020_xxxxxx. (The xxxxxx is the last six

characters of the router’s MAC address.)

-14-