TP-Link TL-MR3020 manual To modify a Reserved IP address

TL-MR3020Portable 3G/4G Wireless N Router

¾MAC Address - Here displays the MAC address of the DHCP client.

¾Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client.

¾Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.

6.7.3Address Reservation

Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a PC on the LAN, so the PC will always obtain the same IP address each time when it accesses the AP. Reserved IP addresses should be assigned to servers that require permanent IP settings. The screen below is used for address reservation (shown in Figure 6-22).

Figure 6-22 Address Reservation

¾MAC Address - Here displays the MAC address of the PC for which you want to reserve an IP address.

¾Reserved IP Address - Here displays the IP address that the AP is reserved.

¾Status - Here shows whether the entry is enabled or not

¾Modify - To modify or delete an existing entry.

To Reserve IP addresses:

1.Click the Add New... button to add a new Address Reservation entry.

2.Enter the MAC address in XX-XX-XX-XX-XX-XX format and IP address in dotted-decimal notation of the computer you wish to add.

3.Click Save when finished.

To modify A Reserved IP address:

1.Select the reserved address entry to your needs and click Modify. If you wish to delete the entry, click Delete.

2.Click Save to keep your changes.

To delete all Reserved IP addresses:

1.Click Clear All.

-221-