TP-Link TL-PS110U manual Misc, Factory Default

TL-PS110USingle USB2.0 Port Fast Ethernet Print Server

Figure 4-8

¾Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server.

¾IP Address: This option allows you to input IP address from the print server. The IP address must meet the IP addressing requirements of the network segment.

)Note:

On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.

¾Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must meet the IP addressing requirements of the network segment.

¾Default Router: This option allows you to input gateway from the print server. This IP address of gateway must meet the router or gateway to go across of the network segment.

4.4 Misc

4.4.1 Factory Default

Click OK to restore the print server to its Factory Default settings.

44