TP-Link TL-PS110U manual Hardware Installation, Preparation, Connection

TL-PS110U

Single USB2.0 Port Fast Ethernet Print Server

Chapter 2. Hardware Installation

2.1 Preparation

Before you start, you should prepare the following items:

¾One printer with USB port

¾One USB printer cable

¾One Router

2.2 Connection

Follow the instructions below to connect the print server. Figure 2-1is a typical typology for the print server.

¾Power off the printer.

¾Connect the print server to your printer with the USB cable.

¾Connect the print server to your Router with an Ethernet cable.

¾Power on the printer.

¾Power on print server.

¾Wait 40 seconds as part of the print server’s Power On Self Test (POST).

Figure 2-1

)Note:

The TL-PS110U is produced without password by default.

2