10/100Mbps Fast Ethernet Switch
10/100Mbps Port
Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100Mbps LED.
■■ Rear Panel
The rear panel of the switch is shown as the following figure.
Grounding Terminal
Power Socket
FFFFFFFFFFF Rear Panel
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground the switch through the PE (Protecting Earth\ cable of AC cord or with Ground Cable. For detailed information, please refer to Chapter 3 Lightning Protection.
Power Socket
Connect the female connector of the power cord here, and the male connector to the AC power outlet. Please make sure the voltage of the power supply meets the requirement of the input voltage.
Caution: Please use the provided power cord.
Introduction 03