08
Gigabit Unmanaged Switch
Note: These tools are not provided with our product. If nee ded, please self purchase
them.
Product Installation112 Desktop Installation
■
To install the device on the desktop, please follow the steps:
Set the device on a flat surface strong enough to suppo rt the entire weight of the 1.
device with all fittings.
Remove the adhesive backing papers from the rubber feet.2.
Turnover the device and attach the supplied rubber feet to the re cessed areas on 3.
the bottom at each corner of the device.
Feet
Bottom of the Device
Notch
Desktop InstallationFigure 2-1
Rack Installation
■
To install the devic e in an EIA standard-sized, 1F-inch rack, foll ow the instructions
described below:
Check the grounding and stability of the rack.1.
Secure the supplied rack-mounting brackets to each side of the device with supplied 2.
screws, as illustrated in the following figure.
Rack-mounting Bracket
Screw
Bracket InstallationFigure 2-2
Installation