Gigabit Unmanaged Switch
CCCCCCCCCCConnection
4444 Ethernet Port
Connect a Ethernet port of the Switch to the computer by RJ45 cable as the following figure shown.
RJ45 Port
RJ45 Cable
FFFFFFFFFFF Connecting the RJ45 Port
4444 Verify Installation
After completing the installation, please verify the following items:
■■
■■
■■
■■
There are 5~10cm of clearance around the sides of the device for ventilation and the air flow is adequate.
The voltage of the power supply meets the requirement of the input voltage of the device. The power socket, device and rack are well grounded.
The device is correctly connected to other network devices.
4444 Power On
Plug in the negative connector of the provided power cord into the power socket of the device, and the positive connector into a power outlet as the following figure shown.
FFFFFFFFFFF Connecting to Power Supply
Connection 
16
