TP-Link TL-SG5428, TL-SG5412F manual Optical fiber, SFP Module

Models: TL-SG5428 TL-SG5412F

1 32
Download 32 pages 875 b
Page 19
Image 19
Optical fiber

SFP ModuleManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background L2 Managed Switch

Optical fiber

Optical fiber can be used as a medium for telecommunication and computer networking. It is especially advantageous for long-distance communications, because light propagates through the fiber with much less attenuation compared to electrical cables. For short distance applications, such as a network in an office building, optical fiber permits transmission over longer distances and at higher bandwidths (data rates\ than other forms of communication. Fibers are used instead of metal wires because signals travel along them with less attenuation and are also immune to electromagnetic interference. There is no cross- talk between signals in different cables, and no pickup of environmental noise.

SFP Module

SFP module are input/output (I/O\ devices that plug into a Gigabit Ethernet port, linking the port with a 1000BASE-X fiber-optic network. A SFP module possesses a receiver port (RX\ and a transmitter port (TX\ that make up one optical interface. To enjoye the required optical reach, users can freely select the appropriate SFP module over the available optical fiber type such as multi-mode fiber or single-mode fiber. Multi-mode fibers generally have a larger core diameter, and are used for short-distance communication links and for applications where high power must be transmitted. Single-mode fibers are used for most communication links longer than 1,050 meters that is 3,440 feet.

TL-SG5428 and TL-SG5412F are compatible with all kinds of gigabit SFP modules including sigle-mode and multi-mode. The transmission distance and the type of optical fiber are determined by the SFP module you choose. Here you are recommanded to choose the SFP modules produced by TP-LINK, which can perfectly enlarge the bandwidth and extend your network.

FFFFFFFFFFFF SFP module

The following table shows the detailed information of two SFP modules (TL-SM311LS and TL-SM311LM\ produced by TP-LINK, which makes you have a round idea about it so as to give you a reference for choosing the suitable SFP module.

Model

TL-SM311LS

TL-SM311LM

 

 

 

 

IEEE 802.3z

IEEE 802.3z

Standards

CSMA/CD

CSMA/CD

 

TCP/IP

TCP/IP

 

 

 

Transmission Media

Single-mode fiber (9/125um)

Multi-mode fiber (50/125um or 62.5/125um)

 

 

 

Transmission Speed

1.25Gbps

1.25Gbps

 

 

 

Transmission Distance

10km

550m

 

 

 

Output Center Wavelength

1310nm

850nm

 

 

 

Note: For security, please wear an ESD-preventive wrist strap when installing or removing the SFP module. For detailed information, please refer to Chapter 3 Lightning Protection.

Connection Manual background 14

Page 19
Image 19
TP-Link TL-SG5428, TL-SG5412F manual Optical fiber, SFP Module