TL-WA601G108M Wireless Access Point User Guide

3.4.1 Basic Settings

The basic settings for the wireless network are set on this page, Figure 3-6:

Figure 3-6 Wireless Settings

¾SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless devices in your network. The default SSID is TP-LINK_xxxxxx (xxxxxx indicates the last unique six characters of each device's MAC address), which can ensure your wireless network security. But it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TP-LINKis NOT the same as tp-link.

¾Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

¾Mode - Select the desired wireless mode. The options are:

108Mbps (Dynamic) - Super G, 802.11g and 802.11b wireless stations can connect to the AP.

108Mbps (Static) - Only Super Gwireless stations can connect to the AP.

54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the AP.

11Mbps (802.11b) - Only 802.11b wireless stations can connect to the AP.

¾Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the AP can be used. If your country or region is not listed, please contact your local government agency for assistance.

The default region is United States. When you select your local region from the pull-down list, the dialog shown in Figure appears below. Click OK.

12

Page 18
Image 18
TP-Link TL-WA601G manual Basic Settings