TP-Link TL-WN822N manual To connect using WPS, PBC Push Button Configuration method

TL-WN821N/TL-WN822N/TL-WN823N 300Mbps Wireless N USB Adapter

3.2To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly.

If the wireless router supports WPS (Wi-Fi Protected Setup) or QSS, you can establish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method.

3.2.1 PBC (Push Button Configuration) method

1.Press the WPS/RESET button for 2~3 seconds on the back panel of the router. Here takes router TL-WR841ND for example.

2.Press the WPS button on the adapter. There are two ways:  Method One：

Press and hold the WPS button on the adapter directly for 2~3 seconds until Figure 3-11appears.

Figure 3-9

Method Two:

Open TWCU and click WPS tab. Select Push the button on my access point or wireless router and then click Connect.

13