Trane 2TWB3018-060 manual General Data, Product Specifications, Accessory Description and Usage

General

Data

Product Specifications

Model No. 1		2TWB3042A1	2TWB3048A1	2TWB3060A1
Electrical Data V/Ph/Hz 2		200/230/1/60	200/230/1/60	208/230/1/60
Min Cir Ampacity		21	25	32
Max Fuse Size (Amps)		35	40	50
Compressor		CLIMATUFF®	CLIMATUFF®	CLIMATUFF® - SCROLL
RL Amps - LR Amps		15.4 - 93.5	18.6 - 93.4	25.0 - 148
Outdoor Fan FL Amps		1.4	1.4	1.2
Fan HP		1/6	1/5	1/5
Fan Dia (inches)		27.6	27.6	27.6
Coil		Spine Fin™	Spine Fin™	Spine Fin™
Refrigerant R-22(Not Factory Supplied)		9/09-LB/OZ	9/09-LB/OZ	9/08-LB/OZ
Line Size - (in.) O.D. Gas 3		7/8	1-1/8	1-1/8
Line Size - (in.) O.D. Liquid 3		3/8	3/8	3/8
Dimensions H x W x D (Crated)		46.4 x 35.1 x 38.7	46.4 x 35.1 x 38.7	46.4 x 35.1 x 38.7
Weight - Shipping		308	312	291
Weight - Net		272	276	255
Start Components		YES	YES	NO
Sound Enclosure		YES	YES	NO
Compressor Sump Heat		YES	YES	YES
Optional Accessories: 4
Anti-short Cycle Timer		TAYASCT501A	TAYASCT501A	TAYASCT501A
Evaporator Defrost Control A/C		AY28X084	AY28X084	AY28X084
Rubber Isolator Kit		BAYISLT101	BAYISLT101	BAYISLT101
Snow Leg-Base & Cap 4" High		BAYLEGS002	BAYLEGS002	BAYLEGS002
Snow Leg-4" Extension		BAYLEGS003	BAYLEGS003	BAYLEGS003
Extreme Condition	Mounting Kit	BAYECMT004	BAYECMT004	BAYECMT004
Refrigerant Lineset	5	TAYREFLN3*	TAYREFLN4*	TAYREFLN4*

Accessory Description and Usage

Anti-Short Cycle Timer — Solid state timing device that prevents compressor recycling until 5 minutes have elapsed after satisfying call or power interruptions. Use in area with questionable power delivery, commercial applications, long lineset, etc.

Evaporator Defrost Control — SPST Temperature actu- ated switch that cycles the condenser off as indoor coil reaches freeze-up conditions. Used for low ambient cooling to 30°F with TXV.

Rubber Isolators — 5 large rubber donuts to isolate condensing unit from transmitting energy into mounting frame or pad. Use on any application where sound transmis- sion needs to be minimized.

Hard Start kit — Start capacitor and relay to assist compressor motor startup. Use in areas with marginal power supply, on long linesets, low ambient conditions, etc.

Extreme Condition Mount Kit — Bracket kits to securely mount condensing unit to a frame or pad without removing any panels. Use in areas with high winds, or on commercial roof tops, etc.

AHRI Standard Capacity Rating Conditions

AHRI STANDARD 210/240 RATING CONDITIONS —

(A)Cooling 80°F DB, 67°F WB air entering indoor coil, 95°F DB air entering outdoor coil.

(B)High Temperature Heating 47°F DB, 43°F WB air entering outdoor coil, 70°F DB air entering indoor coil.

(C)Low Temperature Heating 17°F DB, 15°F WB air entering outdoor coil, 70°F DB air entering indoor coil.

(D)Rated indoor airflow for heating is the same as for cooling.

AHRI STANDARD 270 RATING CONDITIONS — (Noise rating numbers are determined with the unit in cooling operation.) Standard Noise Rating number is at 95°F outdoor air.

SPLIT SYSTEM

22-1771-04 5