Samsung TA950 user manual Plug & Access, Ad-Hoc Network Setup

Basic Features

3.Place the wireless router in parallel with the Samsung

Wireless LAN adapter giving a gap no larger than 25cm. ✎✎ If One Foot Connection does not connect your

TV to your Router, a pop-up window appears on the screen notifying you of the failure. If you want to try using One Foot Connection again, reset the wireless router, disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods.

4.The network connection screen appears, and network setting is done.

5.Place the wireless router in a desired location.

✎✎ If the wireless router settings change or you install a new wireless router, you must perform the One Foot Connection procedure again, beginning from Step 1.

¦¦ Plug & Access

Plug & Access function make you easy to connect samsung TV and samsung wireless router by using USB memory stick. If your wireless router does not support Plug & Access, you must connect using one of the other methods.

✎✎You can check for equipment that supports Plug & Access on www.samsung.com.

How to set up using Plug & Access function

Turn on the power of wireless router and TV.

1.Insert USB memory stick into our Samsung wireless router and checking wireless router’s LED status (Blinking → On).

2.Then take USB memory out and insert it into Samsung TV.

3.Wait until the connection is automatically established. ✎✎ If Plug & Access does not connect your TV to your wireless router a pop-up window appears on the screen notifying you of the failure. If you

want to try using Plug & Access again, reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods.

4.The network connection screen appears, and network setting is done.

5.Place the wireless router in a desired location.

✎✎ If the wireless router settings change or you install a new wireless router you must perform the Plug

&Access procedure again, beginning from Step

1.

Priority QOS

Samsung wireless Router is optimized HD AV streaming for Samsung DTV

This is our product’s distinctive function.

Samsung wireless Router can be connected with many devices, such as laptop, mobile phone, BD player etc.

In case of connecting Samsung TV to Samsung wireless Router while other devices are connected, Samsung wireless Router will give Samsung TV a priority connection than other devices.

This function ensures the best streaming contents and throughput speed.

yy Make your TV faster by giving priority bandwidth to your TV (on/off optional).

yy By giving priority to Samsung TVs, enjoy HD content without buffering.

yy Connection speed may vary based on the network environment.

¦¦ Ad-Hoc Network Setup

You can connect to a mobile device supporting Ad-hoc without an wireless router through the “Samsung Wireless LAN adapter”. When connected to a mobile device, you can use files on the device or connect to the Internet using the AllShare or Multimedia function.

How to set up using WPS(PBC)

1.Go to Network Settings screen. (MENUm→ Network → Network Settings → ENTERE).

2.Select Wireless (General), and press ENTERE, then press ENTEREagain.

3.Select Ad hoc. The message “Ad hoc service supports a direct connection with Wi-Fi compatible devices like a cell phone or PC. The existing network system may have limited functionality. Do you want to change the network connection?” is displayed.

4.Select OK, and press ENTERE. The TV searches for the mobile device.

5.When the TV finishes searching for mobile devices, input the generated Network Name (SSID) and Security Key into the device you want to connect.

✎✎If network does not operate normally, check the Network Name (SSID) and Security key again. An incorrect Security key may cause a malfunction.

✎✎If a device is connected once, it is displayed in the Network Setting list. When you connect to it again, you can find it in the List.

English 39