14
English
Connections

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and ante nna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWEr
P
button. Plug & Play is available only when the Input Source is set to TV.
Before turning on the TV, make sure the antenna ca ble is connected.
1Wired/Wireless network
connection
Set up your network connection. Press the ENTEr
E
button to start.
2Setting up the Network Set up your network connection. Press the ENTEr
E
button to start. If you do not
know your network set up information or want to set to it later, select Skip. You can
set up the network connection later using the Network menu.
3Selecting the usage mode Press the or button, then press the ENTEr
E
button.
Select the Home use mode. Store Demo mode is for retail environments. To
return the unit’s settings from Store Demo to Home use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold MENu
for 5 sec.
yStore Demo is only for shop display. If you select it, several functions are not
able to use. Please select Home use when you watch at home.
4Select Country Press the or button, then press the ENTEr
E
button.
Select the appropriate country.
5Setting the Clock Mode Set the Clock Mode automatically or manually.
yauto: Allows you to select a time zone.
Press the or button to highlight the time zon e for your local area.
Press the ENTEr
E
button. (Australia only)
yManual: Allows you to manually set the current date and time.
6Selecting search options for auto
tuning
Select the channel source to memorise among Digital & analogue / Digital /
analogue.
Press the ENTEr
E
button at any time to interrupt the memoris ation
process.
7Enjoy your TV. If you want to watch a broadcast programme, select Close. If you want to enjoy
the Smart Hub, select the Smart Hub.
If You Want to reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0". If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play (MENu System) again at home although you did in shop.
If you forget the PIN code, press the remote control b uttons in the following seque nce in Standby mode, which resets
the PIN to “0-0-0-0”: POWEr (off) Mu TE 8 2 4 POWEr (on).
Connections
ANT IN
DC 14V
Cable
ANT OUT
Power Input