Trane CAB-PRC001-EN Mechanical Specifications Options, Disconnect Switch, Colors, Leveling Feet

Mechanical Specifications Options

Disconnect Switch

A unit mounted disconnect switch is available as a standard option on all units.

Colors

Six decorator colors are available in a baked powder finish. For a color chart, contact your local Trane office for a copy of UNT-S-10.

Extended End Pockets

On vertical or horizontal cabinet units, an

Quad Grille Outlet8” (20 cm) extended end pocket is available on the piping end.

Tamperproof Locks

Key-operated locking access doors and/or panels will help prevent nuisance tampering with unit and/or controls. Tamperproof locks are available on vertical cabinet, horizontal cabinet, vertical wall-hung cabinet, vertical recessed, and vertical slope-top units.

Leveling Feet

Refrigerator type screw-in bolts to level the unit are available on vertical units.

Bar Grille Inlet and Outlet

Quad Grille Outlet

Quad grilles are square multi-directional grilles that allow four different discharge directions by rotating the grilles 90 degrees. The quad grille is constructed of a black plastic material (NORYL-SE 1-731) with a 15 degree angle on the discharge louvers. Quad grilles are available on all cabinet style units.

Bar Grille Inlet/Outlet

Bar grilles are formed steel grille options available on the discharge of all cabinet units, the return of vertical cabinet and vertical slope tops. The grilles have a black paint finish with 18-gauge steel construction. The louvers are formed at a 15 degree angle. The bar grilles are fixed in one discharge direction.

Sub-bases

Sub-bases elevate vertical cabinet or slope top cabinet units to a specified height; for example, to reach the bottom of a window sill. The sub-base also provides a cavity through which to run piping underneath the unit. Sub-bases are 16-gauge steel construction and have the same black paint finish as the unit’s base. The sub-base is available in heights between 2 - 7” (5 -18 cm) in 1/2” (1 cm) increments. The sub-base depth and width is identical to the unit’s dimensions.

Sub-base (shown turned on its side)

52 CAB-PRC001-EN