Pre-Start

Checklist

Pre-Start-up Checklist

Before energizing the unit, the following system devices must be checked:

____ Is the high voltage power supply correct and in accordance with the nameplate ratings?

____ Is the field wiring and circuit protection the correct size?

____ Is the low voltage control circuit wiring correct per the unit wiring diagram?

____ Is the piping system clean/complete and correct? (A recommendation of all system flushing of debris from

the water-to-refrigerant heat exchanger, along with air purging from the water-to-refrigerant heat exchanger be done in accordance with the Closed-Loop/Ground Source Heat Pump Systems Installation Guide).

____ Is vibration isolation provided? (i.e. unit isolation pad, hose kits)

____ Is unit serviceable? (See clearance specifications on page 6).

____ Are the low/high-side pressure temperature caps secure and in place?

____ Are all the unit access panels secure and in place?

____ Is the thermostat in the OFF position?

____ Is the water flow established and circulating through all the units?

____ Is the duct work (if required) correctly sized, run, taped, insulated and weather proofed with proper unit

arrangement?

____ Is the condensate line properly sized, run, trapped and pitched?

____ Does the indoor blower turn freely without rubbing?

____ Has all work been done in accordance with applicable local and national codes?

____ Has heat transfer fluid been added in the proper mix to prevent freezing in closed system application?

____ Are the compressor bolts removed from the chassis?

____ Have the chassis isolation rails been released?

____ Is there a good seal between the front air panel and the coil?

WSHP-SVN08B-EN

19

Page 18 Page 20
Page 19
Image 19
Trane GETB manual Pre-Start Checklist, Pre-Start-up Checklist, Is unit serviceable? See clearance specifications on
Page 18 Page 20

GETB specifications

The Trane GETB, known for its exceptional efficiency and reliability, stands as a leader in the commercial HVAC industry. Designed to meet the demands of varying environments, the GETB system is particularly beneficial for buildings requiring constant heating and cooling performance.

One of the standout features of the GETB is its use of the Trane Tracer SC+ building management system. This intelligent control platform allows facility managers to efficiently monitor and manage HVAC settings remotely, optimizing comfort and energy consumption. The integration of smart technology significantly reduces operational costs by promoting energy-saving strategies tailored to specific building requirements.

A notable technology incorporated in the Trane GETB system is the use of advanced variable-speed compressors. These compressors adjust their output based on the needs of the building, providing precise temperature control and minimizing energy wastage. With this technology, the GETB can achieve high efficiencies across various load conditions, which is particularly advantageous during periods of fluctuating occupancy.

Another important characteristic of the GETB is its robust design tailored for durability and longevity. Constructed with high-quality materials and components, the system is engineered to withstand the rigors of continuous operation in industrial environments. This resilience ensures minimal disruptions and maintenance needs, allowing for a seamless integration into any facility.

Additionally, the GETB offers extensive options for zoning and temperature control. With its zoning capabilities, different areas of a building can be maintained at separate temperature settings, enhancing comfort for occupants while contributing to energy conservation. The ability to customize the system to suit specific building layouts makes the GETB a versatile choice for a variety of applications.

Furthermore, the GETB is designed with environmental sustainability in mind. By using refrigerants with lower global warming potential, Trane has focused on reducing the ecological footprint of its products. This commitment to sustainability does not only comply with regulatory standards but also supports building owners looking to achieve green certifications.

In summary, the Trane GETB combines advanced technologies, robust design, and energy-efficient features to provide a dependable HVAC solution for commercial spaces. With its smart controls, variable-speed compressors, and emphasis on sustainability, it represents an ideal choice for those seeking reliable heating and cooling in a dynamic and eco-conscious manner.
Top Page Image Contents