12
LED Indication
Record LED
(Red)
Power/Play LED
(Green)
Repeat LED
(Orange) Status
off off off Power off
off fast blink off
Data transfer
off on off Power on (in MP3 mode)
off normal blink off Play MP3 music
off normal blink on
Repeat a track
off normal blink normal blink Repeat all tracks
off normal blink fast blink The beginning of the portion you wish
to repeat is marked in MP3 mode
off normal blink slow blink Repeat a portion of one track
on on off
In Record mode
normal blink off off Record voice
on normal blink off
Play the recorded file(s)
on normal blink on
Repeat a recorded file
on normal blink normal blink Repeat all recorded files
on normal blink fast blink The beginning of the portion you wish
to repeat is marked in Record mode
on normal blink slow blink Repeat a portion of one recorded file
Recover JetFlash
Never use the Format functions of Windows, Macintosh or Linux to format your JetFlash. If
your JetFlash is ever damaged, you can use the Recovery program to restore its default settings.
Running the Recovery program will erase all the data on the JetFlash.
If there are bad blocks in the flash memory chip of JetFlash, the memory size of JetFlash
after running the Recovery program will be smaller than the original memory size.

To Recover JetFlash in Windows 98SE

1. Put the Driver CD into the CD-ROM (Auto-Run supported).
2. Remove the battery from JetFlash.
3. Press and hold the PLAY/PAUSE button, then plug JetFlash into an available USB
port.
Do not release the PLAY/PAUSE button until the Recovery procedures are
completed.