Transcend Information 820 user manual Record using the Built-InMicrophone, RECORD Functions

Record using the Built-In Microphone

1.Unless otherwise selected, Pressing and Holding the “RECORD” button for more than 2 seconds in any mode except the RADIO Mode will begin an audio recording using the T.sonic™ 820’s Built-in Microphone.

2.A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in the [/MICIN.DIR/] folder.

3.Files Recorded using the Built-in Microphone are named in the order [Month/DayM001.WAV], then [Month/DayM002.WAV] and so forth.

4.Pressing the “PLAY/PAUSE” button during a recording will Pause the recording, pressing the

“PLAY/PAUSE” button again will resume the recording.

5.Press the “RECORD” button for more than 2 seconds during a recording to stop the recording and the screen will return to the RECORD Mode.

6.Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator.

	Sample rate	Channels	2GB	4GB
Record Sound	Low (8KHz)	1 (mono)	128 hrs	256 hrs
	Med (16KHz)	1 (mono)	64 hrs	128 hrs
	High (32KHz)	1 (mono)	32 hrs	64 hrs

If not enough memory space is available, or the battery power is too low, the T.sonic™ 820 cannot support the maximum recording capacity as outlined in the above table.

The closer you move the T.sonic™ 820’s Microphone to the source of the sound the higher the quality of the recording.

RECORD Functions

17