Transcend Information 820 user manual Record using the Line-Inconnection, RECORD Functions

Record using the Line-In connection

1.In the REC INPUT DEVICE Mode select Line-Inas the recording device.

2.Plug the Line-In cable into the T.sonic™ 820’s Line-Inport and connect the other end of the Line-In cable to a compatible source device e.g. CD Player.

3.Press and Hold the “RECORD” button for more than 2 seconds to begin recording the source device using the T.sonic™ 820’s Line-In connection.

4.A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in the [/LINEIN.DIR/] folder.

5.Files Recorded using the Line-In are named in the order [Month/DayL001.WAV], then [Month/DayL002.WAV] and so forth.

6.Pressing the “PLAY/PAUSE” button during a recording will Pause the recording, pressing the

“PLAY/PAUSE” button again will resume the recording.

7.Press the “RECORD” button for more than 2 seconds during a recording to stop the recording and the screen will return to the RECORD Mode.

8.Recorded files can be accessed in the RECORD Mode, or by using the File Navigator.

	Sample rate	Channels	2GB	4GB
Record Sound	Low (8KHz)	2 (mono)	64 hrs	128 hrs
	Med (16KHz)	2 (mono)	32 hrs	64 hrs
	High (32KHz)	2 (mono)	16 hrs	32 hrs

If not enough memory space is available, or the battery power is too low, the T.sonic™ 820 cannot support the maximum recording capacity as outlined in the above table.

RECORD Functions

19