Transcend Information 820 user manual Record using the External Microphone, RECORD Functions

Record using the External Microphone

1.In the REC INPUT DEVICE Mode select Ext MIC (External Microphone) as the recording device.

2.Plug an External Microphone into the T.sonic™ 820’s Line-Inport.

3.Press and Hold the “RECORD” button for more than 2 seconds to begin an audio recording using the External Microphone.

4.A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in the [/MICIN.DIR/] folder.

5.Files Recorded using an External Microphone are named in the order [Month/DayM001.WAV], then [Month/DayM002.WAV] and so forth.

6.Pressing the “PLAY/PAUSE” button during a recording will Pause the recording, pressing the

“PLAY/PAUSE” button again will resume the recording.

7.Press the “RECORD” button for more than 2 seconds during a recording to stop the recording and the screen will return to the RECORD Mode.

8.Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator.

	Sample rate	Channels	2GB	4GB
Record Sound	Low (8KHz)	1 (mono)	128 hrs	256 hrs
	Med (16KHz)	1 (mono)	64 hrs	128 hrs
	High (32KHz)	1 (mono)	32 hrs	64 hrs

If not enough memory space is available, or the battery power is too low, the T.sonic™ 820 cannot support the maximum recording capacity as outlined in the above table.

The closer you move the External Microphone to the source of the sound the higher the quality of the recording.

RECORD Functions

18