Transition Networks manual Powering the CPSMC0800-100, Primary Power Supply, Power supply

CPSMC0800-100 PointSystem™ Chassis

3 Powering the CPSMC0800-100

The CPSMC0800-100 chassis can be powered through an AC or DC Power Supply. An optional auxilliary power supply, with Instant Fail Over protections, is also avail- able.

NOTE: The CPSMC0800-100 8-Slot chassis does not have an ON/OFF switch.

•Power up the chassis by connecting the power supply.

•Power-down the chassis by disconnecting power supply.

WARNING: THE AC AND DC POWER SUPPLIES CONTAIN NO USER-SERVICA- BLE PARTS. DO NOT ATTEMPT TO SERVICE EITHER POWER SUPPLY. FAILURE TO OBSERVE THIS CAUTION COULD RESULT IN EQUIPMENT DAMAGE AND/OR PERSONAL INJURY OR DEATH.

NOTE: Contact Technical Support for any questions concerning power supply.

3.1Primary Power Supply

The CPSMC0800-100 includes an internal power supply, which is accessed through a power inlet on the front panel. The power cord is included.

To power the CPSMM0800-100 8-Slot chassis through the Primary Power Supply:

1.Connect the female end of the power cord to the Power Inlet on the front panel of the chassis.

2.Plug the male end of the power cord into the correct voltage rack or wall sock- et.

3.Verify that the 8-Slot chassis is powered by observing the illuminated Power LEDs on the Slide-in-Modules and by the fan operation.

power supply

TXPWR

RXLNK

RESET

TERM

INIT

12C

12C-1

PWR

LKS

LKM

TX

RX

TX

RX

SPD PWR

FRX FLNK

CRX CLNK

TX

10/100SX

RX

10/100TX

CFETF110

DB-9

Singlemode

Multimode

10BASE-T

INPORT

OUTPORT

MCCM10 MGMTMASTER

PWR

LKS

LKM

TX

Singlemode

RX

TX

Multimode

RX

Power Cord

Power Inlet

								Input Power:
								110-240 VAC
								1.6A max. (60W max)
								50/60 Hz
SPDPWR	FRX FLNK	CRXCLNK	TX	10/100SX	RX	10/100TX	CFETF110	CPSMC-0800
								8-Slot Chassis

Tech Support: 7am-6pm CST (GMT -6:00)1-800-260-1312 International: 00-1-952-941-7600 12