Transition Networks CPSMC0800-100 manual Introduction, Description

CPSMC0800-100 PointSystem™ Chassis

1 Introduction

1.1Description

The Transition Networks PointSystem™ CPSMC0800-100 is a 19-inch, rack-mount- able chassis for selected Transition Networks Media Converter Slide-In-Modules. The CPSMC0800-100 allows the network administrator to connect various copper and fiber-optic network media over protocols that include Ethernet™, Fast Ethernet™, DS3/E3, and OC-12. The CPSMC0800-100 provides installation space for up to eight (8) single-slot or four (4) dual-slot Media Converter Slide-in-Modules in the front of the unit.

Management Module Installed Slide-In-Module Open Slot Power Inlet

TXPWR

RXLNK

RESET

TERM

INIT

12C

12C-1

PWR

LKS

LKM

TX

RX

TX

RX

SPD PWR

FRX FLNK

CRX CLNK

TX

10/100SX

RX

10/100TX

CFETF110

50/60 Hz

DB-9

Input Power:

Singlemode

Multimode

110-240 VAC

1.6A max. (60W max)

10BASE-T

INPORT

OUTPORT

MCCM10 MGMTMASTER

PWR

LKS

LKM

TX

Singlemode

RX

TX

Multimode

RX

SPD PWR

FRX FLNK

CRX CLNK

TX

10/100SX

RX

10/100TX

CFETF110

CPSMC-0800

8-Slot Chassis

introduction

The CPSMC0800-100 also comes equipped with an AC or DC power supply. An optional AC or DC power supply with Instant Fail Over operation is also available. The primary power supply is accessed through the Power Inlet on the front panel, while auxilliary power is accessed through the Auxilliary Power Inlet, located on the back panel.

Auxilliary Power Inlet

Four fans, two for the power supplies and two for the Slide-In-Modules, help remove heat from the chassis.

With installed PointSystem™ Management Module(s) (TN part number CPSMM- 120, -200, or -210), the CPSMC0800-100 can be managed and monitored via:

•An SNMP application such as Transition Networks FocalPoint™ management software installed at a remote Network Management Station (NMS).

•A remote Web browser.

•A command-line interface (CLI) at an attached terminal.

•A command-line-interface (CLI) at a remote Telnet connection.

The management features include:

•Power control (slot on, slot off, in rush limit) for each individual slot.

•Internal temperature monitor.

•Fan failure monitor.

•Chassis power consumption monitor.

•Power supply type identification.

•Power supply condition monitor.

•Fail-over power detection.

The Management Modules also make it possible to control up to eight (8) cascaded CPSMC0800-100 chassis, which can accomodate up to 55 installed Media Converter Slide-in-Modules.

Tech Support: 7am-6pm CST (GMT -6:00)1-800-260-1312 International: 00-1-952-941-7600 4