Transition Networks CPSMC0800-100

CPSMC0800-100 PointSystem

™

Chassis

SNMP

Tech Support: M-F 7am-6pm CST (GMT -6:00) 1-800-260-1312 International:00-1-952-941-7600

5 SNMP Agent in the Management Module

Both Management Modules (CPSMM-120 and (CPSMM-200) have an SNMP

(Simple Network Managment Protocol) Agent installed in the module that allows

remote managment of networked devices.

The SNMP agent includes the Transition Networks PointSystem™ Command Line

Interface (CLI) and an embedded Telnet server.

These tools allow the network adminsitrator to configure and manage the

CPSMC0800-100 8-Slot from an attached terminal or from a remote, networked

computer.

In addition, Transition Networks FocalPoint™ software can be installed in the net-

worked computer to provide a graphical user interface to monitor the Conversion

Center.

5.1 SNMP Hardware Connections

The SNMP software can be accessed either through the Management Module’s DB-

9 serial port or through the RJ-45 Ethernet™port.

DB-9 Serial Port

The DB-9 serial port allows the network administrator to configure and manage the

CPSMC0800-100 8-Slot chassis using the SNMP Command-Line Interface (CLI) at

an attached terminal or terminal emulator.

Use a null modem cable to attach a terminal to the DB-9 serial port on the

Management Module as shown.

10BASE-T INPORT

CPSMM200

OUTPORT

12C 12C-1TERM INIT

LNK

PWR

RESET

DB-9

10BASE-T

LNK

PWR

RESET

SERIAL

CPSMM120

RJ-45 Ethernet Port

CPSMM-200 CPSMM-120

DB-9 Serial Port

10BASE-T INPORT

MCCM10

MGMT MASTER

OUTPORT

12C 12C-1TERM INIT

LNK

PWR

RESET

DB-9

CFETF110

SPD PWR

FRX

CRX

FLNK

CLNK

10/100TX

10/100SX

LKS

PWR

LKM

Multimode

Singlemode

CFETF110

SPD PWR

FRX

CRX

FLNK

CLNK

10/100TX

10/100SX

LKS

PWR

LKM

Multimode

Singlemode

CPSMC-0800

8-Slot Chassis

Mpls, MN 55344

Input Power:

110-240 VAC

1.6A max. (60W max)

50/60 Hz

Attached terminal or terminal emulator

connected to the DB-9 serial port

via null modem cable.