Installation -- Continued
Installing the fiber cable
1.Locate a
RX connectors installed at both ends.
2. Connect the fiber cables to the media converter as described:
•Connect the male TX cable connector to the female TX port.
•Connect the male RX cable connector to the female RX port.
3.Connect the fiber cables to the other device (another media converter, hub, etc.) as described:
•Connect the male TX cable connector to the female RX port.
•Connect the male RX cable connector to the female TX port.
Connect fiber cable | Connect fiber cable |
to media converter | to other device |
as shown. | (media converter, |
| hub, etc.) as shown |
RX | RX |
TX | TX |
Installing the copper cable
1.Locate or build
2.Connect the
3.Connect the
|
|
|
|
|
|
|
|
on the media | on the other device | ||
converter | (switch, work station, etc.) | ||
|
|
|
|
Installation
Power the media converter
AC
1.Install the power cord barrel connector into the back of the media converter.
2.Connect the power adapter plug into AC power.
3.Verify that the media converter is powered by observing the illuminated LED power indicator light.
DC
Consult user guide 33266 for information on the
Operation
Status LEDs
Use the status LEDs to monitor the
Power | (Power) | On = Connection to external AC power. |
SDF | (Signal Detect/Fiber) | On = Fiber link is detected. |
SDC | (Signal Detect/Copper) | On = Copper link is detected. |
RXC | (Receive/Copper) | Flashing = A signal is being received on |
|
| the copper link. |
RXF | (Receive/Fiber) | Flashing = A signal is being received on |
|
| the fiber link. |
Auto-Negotiation
When the
4 | techsupport@transition.com | 5 |