Lens Installation, Removing the lens | Sanyo PLC-HP7000L specification

Installation

Lens Installation

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications.

Removing the lens

1Shift the lens to the center position by using the Lens shift function (p. 27).

2Turn off the projector and unplug the AC power cord.

3While pressing the top cover release button on the top cover, slide the top cover toward front to remove it.

4Slide the light-block sheet upward and remove it.

5Hold the lens with one hand and pull the Lens Lock Lever upward with the other hand. Remove the lens from the projector.

]Do not touch the glass part of the lens with your hand.

CAUTION

Be careful when handling the lens. Do not drop.

Top cover release button Top cover

Light-block sheet

Page 17

Image 17

Sanyo PLC-HP7000L owner manual Lens Installation, Removing the lens

Contents

Network Set-up and Operation  Projection lens is optional Features and Design Table of Contents To The Owner Safety PrecautionFor EU Users Please, help us to conserve the environ- ment we live Mounting kit approved by the manufacturers Safety Instructions Top Panel Safety Instructions Air CirculationAir flow Air Intake Vent Cautious use of equipment with laser technology Positioning Precautions Never allow children to touch the lens Safety Instructions Moving the Projector AC Power Cord for the United States and Canada AC Power Cord RequirementAC Power Cord for the United Kingdom Compliance Front ① Part Names and Functions Part Names and Functions Rear Terminal Side Control Indicators on the top panel Part Names and Functions Side Control and Indicators Part Names and Functions Remote Control Part Names and Functions 16.4’ 5 m Remote Control Receivers and Operating RangeWired Remote Control Transmitter ON/OFF Part Names and Functions Remote Control CodeAdjustable Feet Removing the lens InstallationLens Installation Attaching the lens to the projector Installation Be Sure to Check for Safety Focus adjustmentFocus correction LNS-W34 Output MonitorSerial Digital Monitor Out Signal Table For Continental Europe Installation Connecting the AC Power CordProjector side AC Outlet side Enter a PIN code Basic OperationTurning On the Projector Power off? disappears after 4 seconds What is PIN code?Basic Operation Turning Off the Projector Remote Control Basic Operation How to Operate the On-Screen MenuSide Control On-Screen Menu Basic Operation Main Menu Lens Shift Adjustment Zoom AdjustmentBasic Operation Operating with Projector Control Lens Operation Information Menu Basic Operation Operating with Remote Control User 1 of PIP example Pointer button Timer buttonUser 2 of PIP example Mouse Standard Basic Operation Keystone CorrectionCorner correction Point Basic Operation Pointer Function Wireless Mouse OperationMouse Pointer button Arrow Finger Remote Control Operation Side Control/Remote Control OperationDirect Operation Side Control Input Selection Computer Input Source Selection When Selecting Input 2 5 BNC Input JacksMenu Operation Rgbpc analog When Selecting Input 3 AV Terminals When Selecting Input 1 Computer Input TerminalsInput Selection Video Input Source Selection Rgbav Hdcp Computer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System Manually To store the adjusted parameters Computer Input Auto PC AdjustmentPC adjust Menu Direct Operation Adjust and then press the Point or the Select Computer Input Manual PC AdjustmentCurrent mode Position H Store Mode freeComputer Input Image select Menu Computer Input Image Level Selection Image adjust Menu Computer Input Image AdjustmentList Color M Color Palette MenuDEL ALL DEL Auto picture control Offset Red/Green/BlueOff Auto picture control OFF position Advanced color Computer Input Screen Size Adjustment Custom adj Reset............... Reset all the adjusted values. PressCustom adj Digital zoom + Keystone Ceiling Rear Video System Selection Video InputVideo Jack or S-video Jack Pb/Cb, Pr/Cr Jacks Picture level adjusted with fine tone Natural picture level preset on the projectorVideo Input Image Level Selection Natural Use the Point buttons to adjust the setting value Video Input Image AdjustmentColor Tint Video Input Use the Point buttons to select the advanced color Mode Noise reduction Noise reduction mode is OnOff Progressive Natural Wide Video Input Screen Size Adjustment……………When set to On, the aspect ratio is Keystone Ceiling Setting Menu Language Position SettingSetting Logo select Logo PIN code lock Capture Logo PIN code lockCapture Change the Logo PIN code lock setting Change the Logo PIN code lock settingEnter a Logo PIN code Enter a Logo PIN code Position Menu Picture in Picture Frame lock To store the adjusted dataSet the Frame Lock to Main picture or Sub picture Edge blending Advanced Color matching...... Select Advanced color matching Color matching Hdmi setup Cancels the Advanced colorMeasured information Advanced color matching Test pattern Advanced color matching Lamp control Filter controlFilter control Fan control To change the code for the projector To change the code for the remote controlSimple mode buttons Shut down ...... When the lamp has been fully cooled Power managementTimer............... If the input signal is interrupted Timer left before Lamp is off Stop or Cancel the P-timer via Remote Control TimerPointer 18000 PIN code lock Key lockSecurity Key lock and PIN code lock …Unlocked Enter a PIN code Change the PIN code lock settingPIN code change Shutter ShutterProtection Release key Closed caption Video delay controlClosed caption Lamp counter Be sure to reset the Lamp replacement counter afterLamp counter . . . . . . . . . This item shows the total Accumulated time of the lamp Usage Filter counter Factory defaultFilter counter Test pattern Reset the Filter counter p.73 and the Scroll counter p.73 Maintenance and CareFilter Instructions Please wait.... . message Order Replacement Filter Cartridge Maintenance and Care Replacing the Filter CartridgeRecommendation Model No.. of your projector PLC-HP7000L Resetting the Scroll Counter Maintenance and Care Resetting the Filter CounterFilter counter Filter counter Reset? appears Scroll counter Scroll counter Reset? appears Lamp replacement icon Maintenance and Care Lamp ReplacementLamp Replace indicator Follow these steps to replace the lamp Lamp Handling Precautions Maintenance and CareOrder Replacement Lamp PLC-HP7000L Unplug the AC power cord before cleaning Maintenance and Care Cleaning the Projection LensCleaning the Projector Cabinet Then check the matters below Is the filter clean? Replace the filter with a new one Appendix TroubleshootingProblem Solutions Appendix Indicators blink or Wireless mouseYou cannot operate Does not work Computer Input Appendix Menu TreeComputer Input/HDMI Input/Video Input Screen Hdmi Input/Video InputVideo Input Off/On Logo PIN code lock Picture in Picture Languages provided Position Menu Normal/DoubleLeft/Right Start Edge blending Top/Bottom Start Left/Right Width Top/Bottom Width Timer Yes/No Filter Direct on Pointer Timer Security Shutter Closed captionRelease key 480 Min Projector is operating normally Appendix Indicators and Projector Condition Lamp Replace Projector is detecting abnormal condition Projector Condition Indicators 72.004 Appendix Compatible Computer Specifications Resolution Mechanical Information Appendix Technical Specifications To the sales and service Lens ReplacementAppendix Optional Parts PJ Link Notice LAN Terminal Appendix Configurations of TerminalsDigital DVI-D DVI 24 PIN Appendix PIN Code Number Memo Appendix Dimensions Serial Control Interface Appendix List of Picture in PictureOperation Note Format Functional Execution Command Status Read Command KY2AL