
Setting
Advanced color matching
Measured Information | When selecting Measured |
| Information, the window shown |
| right appears. Current image level is |
| shown. To go back to the Advanced |
Advanced color matching | color matting window, press any key. |
Press the POINT ▲▼ buttons to | |
| switch between On and Off. Selecting |
| On displays the values which link to |
Measured | the Color Match values. |
Displays the measured values of Red, | |
Target | Green, and Blue. |
Adjusts the chromatic coordinate | |
| (X,Y) and the gain value (g) of Red, |
| Green, Blue, Cyan, Magenta, Yellow, |
| and White. Use the Point ▲▼ |
| buttons to move the red frame pointer |
| to an item of which you want to adjust |
| the value and then press the SELECT |
| button. Use the Point ▲▼ buttons |
| to adjust the value. To move to the |
| next digit, use the Point ▲▼ buttons. |
| Press the SELECT button to set the |
| value. |
Auto test pattern | Select On to display a suitable pattern |
Menu off | when setting items. |
Close the menu temporarily. | |
Factory default | Select Factory default and press |
| the SELECT button. Then Return to |
| factory default of Color matching? |
| message appears. To reset the |
| selected Measured value and |
| Target value, select Yes. Then, the |
| confirmation box appears. Press the |
| SELECT button at Yes again. |
Reset | Select Reset and press the SELECT |
| button. Then the confirmation |
| message appears. Press the |
| SELECT button at Yes. to reset to the |
| previously stored values. |
Store | Select Store and press the SELECT |
| button. Then the Confirmation box |
| appears. To store adjusted data, |
| select Yes. |
Test pattern | Displays the Test pattern menu. |
Back | Cancels the Advanced color |
| matching menu display. |
HDMI setup
Select Normal or Enhanced according to the output signal of video equipment. Press the Point ▲▼ buttons to switch between each option.
Normal ........ When the output of video equipment is set
to “STANDARD.”
Enhanced .... When the output of video equipment is set
to “ENHANCED.”
Measured information
Advanced color matching
Test pattern
Note:
•The names for the output setting of video equipment vary from equipment to equipment. For details, refer to the manual of video equipment.
60