Setting
Shutter
Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.
Protection
Prohibit the shutter operation from the remote control and the projector's side control.
……………Permit the shutter operation from
both the remote control and the projector's side control.
……………Prohibit the shutter operation from
the remote control.
……………Prohibit the shutter operation from
the side control.
……………Prohibit the shutter operation from
both the remote control and the projector's side control.
Release key
By using the Release function from the following options, the Shutter can be released when it stays activated (i.e. when it is closed. )
Any ……By pressing any button on the projector's side
control or the remote control, the shutter can be released when it is closed, and meanwhile the function of the selected item will come into effect.
SHUTTER…Only by pressing the SHUTTER button on the projector’s side control or the remote control the shutter can be released when it is closed.
In addition, when the Shutter is functioning, only the following buttons are active:
--INPUT button and
--INPUT 1/2/3 buttons and
Management
The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The
up automatically and the lamp will be turned off to cool itself down. The LAMP/SHUTTER indicator is blinking blue during this
green lighting and the LAMP/SHUTTER indicator keeps
blinking. Should the ON /
Note:
The Shutter Management function cannot be halted.
Shutter
Note:
When the shutter is closed, if the projector is turned off and on, the shutter will be released.
67
