Sanyo PLC-HP7000L owner manual Direct Operation, Side Control/Remote Control Operation

Input Selection

	Direct Operation
Side Control/Remote Control Operation
Side Control	Remote Control

INPUT button*

INPUT button*

*Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source. (p.53)

The input source changes each time you press the INPUT button on the side control or the remote control as follows:

Input 1→ Input 2→ Input 3 → ...

Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.

Remote Control Operation

Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you press each button. Select the connected input source.

INPUT 1 button

Input 1

RGB (PC analog)

RGB (Scart)

RGB (PC digital)

RGB (AV HDCP)

HDMI

INPUT 3 button Input 3 Video

Y,Pb/Cb,Pr/Cr

S-video

INPUT 2 button Input 2

Video

Y,Pb/Cb,Pr/Cr

RGB

Remote Control

INPUT 1/2/3 buttons

32