Appendix

 

 

 

 

 

 

 

 

The projector is detecting abnormal condition..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicators

 

Projector Condition

 

 

POWER

 

LAMP/

LAMP

WARNING

WARNING

 

 

 

 

 

 

 

 

green

 

 

SHUTTER

REPLACE

FILTER

TEMP.

 

 

 

 

 

red/blue

orange

orange

red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the Filter counter reaches a time set in the

 

 

 

 

 

 

timer setting, a Filter replacement icon (Fig.2) will

 

 

 

 

 

 

 

 

 

appear on the screen and the WARNING FILTER

 

 

 

 

 

 

 

 

 

indicator on the top panel will light up. Replace

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the filter as soon as possible. If the filter is out

 

 

 

 

 

 

 

 

 

of scroll and the projector reaches a time set in

 

 

 

 

 

 

 

 

 

the timer setting, Fig. 3 will appear on the screen

 

 

Fig..2

 

Filter replacement icon

 

 

and the WARNING FILTER indicator will light up.

 

 

 

 

 

 

 

 

 

Replace the filter cartridge as soon as possible.

 

 

 

 

 

 

 

 

 

If the filter is clogged and no scroll is left in the

 

 

 

 

 

 

 

 

 

filter cartridge, a Filter cartridge replacement

 

 

Fig..3

 

 

 

 

 

 

icon (Fig.4) will appear on the screen and the

 

 

 

 

 

 

 

 

WARNING FILTER indicator will light up. Replace

 

 

 

 

 

 

 

 

 

the filter cartridge as soon as possible.

 

 

 

 

 

 

 

 

 

Note:

 

 

Fig..4

Filter cartridge replacement icon

 

Fig.2, Fig.3 and Fig.4 icon will not appear

 

 

 

when the Display function is set to Off (p.54)

 

 

 

 

 

 

 

 

 

or during “Freeze” (p.29).

 

 

 

 

 

 

 

 

 

The filter cartridge is not installed in the projector.

 

 

 

 

 

 

 

 

 

Check the filter compartment to see if the filter

 

 

 

 

 

 

 

 

 

cartridge is installed in the projector. When the

 

 

 

 

 

 

 

 

 

filter cartridge is installed and the indicators

 

 

 

 

 

 

 

 

 

continue to light and blink, read the column

 

 

 

 

 

 

 

 

 

below.

 

 

 

 

 

 

 

 

The projector detects an abnormal condition and

 

 

 

 

 

 

 

 

 

cannot be turned on. Unplug the AC power cord

 

 

 

 

 

 

 

 

 

and plug it again to turn on the projector. If the

 

 

 

 

 

 

 

 

 

projector is turned off again, unplug the AC power

 

 

 

 

 

 

 

 

 

cord and contact the dealer or the service center.

 

 

 

 

 

 

 

 

 

Do not leave the projector on. It may cause an

 

 

 

 

 

 

 

 

 

electric shock or a fire hazard.

 

 

 

 

The shutter is out of control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The shutter is out of control. (The projector is in

 

 

 

 

 

 

the cooling mode.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The shutter is out of control. (The projector is

 

 

 

 

 

 

in the stand-by mode.) In that case, contact the

 

 

 

 

 

 

 

 

 

service center immediately.

 

87

Page 87
Image 87
Sanyo PLC-HP7000L owner manual Projector Condition, Indicators