Basic Operation

Keystone Correction

If a projected picture still has keystone distortion after pressing the AUTO PC button on the remote control, correct the image manually as follows:

Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point ▲▼◄► buttons to correct the Standard or Corner distortion. The Standard or Corner correction adjustment can be stored (see pages 45, 52).

Standard

Reduce the lower width

Reduce the upper width

with the Point ▼ button.

with the Point ▲ button.

Reduce the right part

Reduce the left part

with Point ► button.

with Point ◄ button.

Corner correction

Press the KEYSTONE button on the remote control to switch Corner correction adjustment, press the SELECT button on the remote control to select the corner you want to adjust.

Reduce the top left corner

Reduce the top right corner

part with the Point ►▼

part with the Point ◄▼

buttons.

 

buttons.

 

 

 

 

 

 

 

 

 

Press the

 

 

 

 

 

 

 

 

SELECT

 

 

 

 

 

 

 

 

Keystone

 

 

Keystone

 

 

 

 

 

button

 

 

 

 

 

Press the

 

 

Press the

 

 

 

SELECT

 

 

 

SELECT

button

Press the

 

button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT

 

 

 

 

 

 

 

 

 

button

 

 

 

 

 

 

Keystone

 

Keystone

 

 

Reduce the bottom left

Reduce the bottom right

corner part with the Point

corner part with the Point

►▲ buttons.

 

◄▲ buttons.

Remote Control

POINT

▲▼◄►buttons

KEYSTONE button

Note:

The white arrows indicate that there is no correction.

A red arrow indicates the direction of correction.

An arrow disappears at the maximum correction.

If you press and hold the KEYSTONE button for more than 3 seconds while the Standard or Corner correction dialog box is being displayed, the Standard or Corner correction adjustment will be released.

The Corner pattern can be set to Off, Red, White or Blue in the Corner pattern function. See "Keystone" on pages 45, 52.

The adjustable range is limited depending on the input signal.

Standard and Corner correction functions cannot be adjusted at the same time. If one of the functions is adjusted, and then the other one will be reset automatically.

The top left corner adjustment as an example:

 

Press the

 

 

Point ▼

 

Keystone

button

Keystone

 

 

 

 

 

Press the Point

 

 

 

 

 

 

Keystone

 

 

 

 

 

 

► button

30

Page 30
Image 30
Sanyo PLC-HP7000L Basic Operation Keystone Correction, Standard, Corner correction, Point, Buttons Keystone button