Video Input

Image Adjustment

1Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button.

2Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.

Contrast

Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).

Brightness

Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63).

Color

Press the Point ◄ button to decrease the intensity of the color; press the Point ► button to increase the intensity of the color (from 0 to 63).

Image adjust Menu

Selected Image mode

Tint

Press the Point ◄► buttons to adjust the tint value to get a proper color balance (from 0 to 63).

Color management

Refer to pages 40 and 41.

Color temp..

Use the Point ◄► buttons to select the desired Color temp. level (High, Mid, Low or XLow).

White balance (Red)

Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63).

Note:

Use the Point ◄► buttons to adjust the setting value.

When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj..

Tint cannot be selected when the video system is PAL, SECAM, PAL-Mor PAL-N(p.46).

48

Page 48
Image 48
Sanyo PLC-HP7000L owner manual Video Input Image Adjustment, Color, Tint, Refer to pages 40