Sanyo PLC-HP7000L owner manual Basic Operation Main Menu

Basic Operation

Main Menu

For detailed functions of each menu, see “Menu Tree” on pages 81-83.

Main Menu Sub-Menu



















Input

Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.32).

Note: Network will not be displayed when optional PJ-Net Organizer is not attached.

PC adjust

Used to adjust the parameters to match with the input signal format (pp.36-38).

Image select

For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10(p.39).

For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10(p.47).

Image adjust

For computer source, used to adjust the computer image. [Contrast/Brightness/Color management/ Color temp../White balance (Red/Green/Blue)/Offset(Red/Green/Blue)/Auto picture control/ Advanced color/Sharpness/Gamma/Reset/Store] (pp.40-42).

For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color management/Color temp../White balance (Red/Green/Blue)/Offset (Red/Green/Blue)/Auto picture control/Advanced color/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.48-50).

Screen

For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/ Custom/Custom adj../Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.43-45).

For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural Wide/Custom/Custom adj../Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 51-52).

Setting

Used to set the projector’s operating configurations (pp.53-71).

Information

Display the input source information: Input, System, H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO.. (p.28).

Network

See the owner’s manual of “Network Set-up and Operation”.

Guide

The key operation is displayed.

26