Computer Input

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Mode free

Mode free

To clear the stored data, select Mode free and then press the Point ► or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button.

Store

To store the adjusted data, select Store and then press the Point ► or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button.

This mode has stored parameters.

Values of Total dots,

Press the

Position H, Position V,

SELECT button

Display area H and

to clear the

Display area V.

stored data.

Store

Vacant

Note:

Display area (H/V) cannot be selected when 480i,

575i, 480p, 575p, 720p, 1035i, 1080i or 1080p is selected in the PC System Menu (p.35).

When input computer signal to the projector, PC adjust function will become available.

Press the MENU

Press the SELECT

button to close

button to store the

this dialog box.

data.

38

Page 38
Image 38
Sanyo PLC-HP7000L owner manual Computer Input, Mode free, Store