Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may shorten the lamp life and result in severe accidents or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up.
Note:
To inverse or reverse the image, set the ceiling function to On. (pp. 45, 52)
Positioning Precautions
Avoid positioning the projector as described below when installing.
Do not tilt the projector more than 10 degrees from side to side.
10°
10°
In upward projection, do not tilt the projector over 10 degrees right and left.
Do not put the projector on either side to project an image.
In downward projection, do not tilt the projector over 10 degrees right and left.
10°
10°
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non- recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.
Cautious use of equipment with laser technology
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the functionality of the projector, and will void any applicable warranties.
7
