Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are being operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 62.

MENU button

1Press and hold the MENU and a number button (1–8) for more than five seconds to switch among the codes.

2To reset the remote control code, press and hold the MENU and the number button 0 for more than five seconds.

Number buttons (1-8)

ON/OFF

Switch

Press and hold the MENU and a number button (1-8) that corresponds to the remote control code for more than five seconds to switch among the codes.

Adjustable Feet

Projection angle can be adjusted up to 6.5 degrees with the adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise.

To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise.

To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 30, 45, 52).

Adjustable

Feet

16

Page 16
Image 16
Sanyo PLC-HP7000L owner manual Part Names and Functions Remote Control Code, Adjustable Feet, On/Off