Transition Networks E-100BTX-FX-05 Cable Specifications -- Continued, Fiber cable

E-100BTX-FX-05

Standard Models -- continued

E-100BTX-FX-05(XLW)	1550 nm single mode
Fiber-optic Transmitter Power:	min: 0.0 dBm	max: 5.0 dBm
Fiber-optic Receiver Sensitivity:	min: -36.0 dBm	max: -3.0 dBm
Link Budget:	36.0 dB

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.

Cable Specifications

The physical characteristics must meet or exceed IEEE 802.3™ specifications.

Fiber cable

Bit Error Rate:	<10-9
Single mode fiber (recommended):	9 µm
Multimode fiber (recommended):	62.5/125 µm
Multimode fiber (optional):	100/140, 85/140, 50/125 µm

Cable Specifications -- Continued

Copper cable

Category 5: (minimum requirement)
Gauge:	24 to 22 AWG
Attenuation:	22.0 dB /100m @ 100 MHz
Maximum Cable Distance:	100 meters

•Straight-through OR crossover cable may be used.

•Shielded twisted-pair (STP) OR unshielded twisted-pair (UTP) may be used

•Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .

•RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-

•Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

•Do not use flat or silver satin wire.

	Straight-Through Cable		Crossover Cable
Twisted Pair #1		Twisted Pair #1
Twisted Pair #2		Twisted Pair #2

Extended temperature models

E-100BTX-FX-05(HT)

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

E-100BTX-FX-05(SCHT)

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

E-100BTX-FX-05(SMHT)

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

E-100BTX-FX-05(LHHT)

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

E-100BTX-FX-05(XLHT)

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

E-100BTX-FX-05(LWHT)

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB
1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB
1310 nm single mode
min: -15.0 dBm	max: -8.0 dBm
min: -31.0 dBm	max: -8.0 dBm
16.0 dB
1310 nm single mode
min: -8.0 dBm	max: -2.0 dBm
min: -34.0 dBm	max: -7.0 dBm
26.0 dB
1310 nm single mode
min: -5.0 dBm	max: 0.0 dBm
min: -38.0 dBm	max: -8.0 dBm
33.0 dB
1550 nm single mode
min: -5.0 dBm	max: 0.0 dBm
min: -34.0 dBm	max: -7.0 dBm
29.0 dB

Technical Specifications

For use with Transition Networks Model E-100BTX-FX-05(xxxx) or equivalent

Standards:	IEEE 802.3
Data rate:	100 Mb/s
Dimensions:	4.75" x 3.0" x 1.0" (119mm x 76mm x 25mm)
Weight:	6 oz. (181 g) approximate
MTBF	46,768 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
	123,821 hours (Bellcore7 V5.0)
Power supply:	(standard temperature)	12 VDC, 0.5 A (minimum)
DC output:	(extended temperature)	9 VDC, 1.0 A (minimum)
	minimum output regulation: 5%
Environment:	Tmra* (standard temp):	0°C to 50°C (32 to 122°F)
	Storage Temperature:	-15°C	to 65°C (5 to 149°F)
	Tmra* (extended temp):	-25°C	to 65°C (-13 to 149°F)
	Storage Temperature:	-25°C	to 65°C (5 to 149°F)
	Humidity:	10% – 90%, non-condensing
	Altitude:	0 to 10,000 feet
Warranty:	Lifetime

*Manufacturer’s rated ambient temperature.

Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the date of manufacture.

CAUTION: Visible and invisible laser radiation when open. Do not stare into beam or view directly with optical instruments.

CAUTION: Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

8 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 9