Rate Conversion
The SBFTF10xx-12x media converter allows connection of 10Mb/s terminal devices on a 10Base-T legacy Ethernet copper network to 100Mb/s terminal devices on a 100Base-TX fast Ethernet copper network and/or to 100Mb/s terminal devices on a 100Base-FX fast Ethernet fiber network.
Congestion Reduction
The SBFTF10xx-12x media converter does not forward collision signals or error packets from one collision domain to another, improving baseline network performance. In addition, the media converter filters packets destined for local devices, also reducing network congestion.
Auto-Negotiation
The Auto-Negotiation feature allows the SBFTF10xx-12x media converter to automatically configure itself to achieve the best possible mode of operation over a link. The media converter broadcasts its speed (10 Mb/s or 100 Mb/s) and duplex capabilities (full or half) to the other devices and negotiates the best mode of operation. Auto-Negotiation allows quick and easy installation because the optimal link is established automatically.
A scenario where the media converter is linked to a non-negotiating device is a case where the user may want to disable Auto-Negotiation. In this instance, the mode of operation will drop to the least common denominator between the two devices (e.g.: 10 Mb/s, half-duplex). Disabling this feature gives the user the ability to force the connection to the desired speed and duplex mode of operation.
AutoCross™
When the AutoCross feature is activated, it allows either straight-through (MDI) or crossover (MDI-X) copper cables to be used when connecting to 10Base-T or 100Base-TX devices. AutoCross determines the characteristics of the connection and automatically configures the unit to link up, regardless if the copper cable is MDI or MDI-X configuration. (Transition networks recommends leaving the device in the default “enable” mode.)
Fiber Cable
Bit Error Rate:
single mode fiber (recommended): Multimode fiber (recommended): Multimode fiber (optional):
SBFTF1011-120
SBFTF1013-120
Fiber Optic Transmitter Power:
Fiber Optic Receiver Sensitivity:
Link Budget:
SBFTF1014-120
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1015-120 (long haul)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1016-120(extra long haul)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1017-120(long wave length)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1018-120
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1025-120
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1029-120
SBFTF1029-121
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SBFTF1029-122
SBFTF1029-123
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
<10-9
9µm 62.5/125 µm
100/140, 85/140, 50/125 µm
1300 nm multimode | |
1300 nm multimode | |
min: -19.0 dBm | max: -14.0 dBm |
min: -30.0 dBm | max: -14.0 dBm |
11.0 dB | |
1310 nm single mode |
min: -15.0 dBm | max: -8.0 dBm |
min: -31.0 dBm | max: -8.0 dBm |
16.0 dB | |
1310 nm single mode |
min: -8.0 dBm | max: -2.0 dBm |
min: -34.0 dBm | max: -7.0 dBm |
26.0 dB | |
1310 nm single mode |
min: -5.0 dBm | max: 0.0 dBm |
min: -34.0 dBm | max: -7.0 dBm |
29.0 dB | |
1550 nm single mode |
min: -5.0 dBm | max: 0.0 dBm |
min: -34.0 dBm | max: -7.0 dBm |
29.0 dB | |
1300 nm multimode | |
min: -19.0 dBm | max: -14.0 dBm |
min: -33.5 dBm | max: -14.0 dBm |
14.5 dB | |
1310 nm single mode |
min: -11.0 dBm | max: -3.0 dBm |
min: -20.0 dBm | max: -3.0 dBm |
9.0 dB | |
1310 nm (TX) / 1550 nm (RX) simplex
1550 nm (TX) / 1310 nm (RX) simplex
min: -13.0 dBm | max: -6.0 dBm |
min: -32.0 dBm | max: -3.0 dBm |
19.0 dB | |
1310 nm (TX) / 1550 nm (RX) simplex
1550 nm (TX) / 1310 nm (RX) simplex
min: -8.0 dBm | max: -3.0 dBm |
min: -33.0 dBm | max: -3.0 dBm |
25.0 dB | |