Troubleshooting
If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action:
1.Is the power LED on the media converter illuminated?
NO
•Is the power adapter the proper type of voltage and cycle frequency for the AC outlet? (See “Power Supply” on page 13.)
•Is the power adapter properly installed in the media converter and in the outlet?
•Contact Technical Support: US/Canada:
International:
YES
•Proceed to step 2.
2.Is the “Duplex/Link” LED illuminated on a port with
NO
•Check the copper cables for proper connection.
•Contact Technical Support: US/Canada:
International:
YES
•Amber = The media converter has selected
•Green = The media converter has selected
•If the mode is not correct, disconnect and reconnect the twisted pair cable to restart the initialization process.
•Proceed to step 3.
3.Is the “LACT” LED illuminated on the fiber cable port?
NO
•Check the fiber cables for proper connection.
•Verify that the TX and RX cables are connected to the RX and TX ports, respectively, on the
•Contact Technical Support: US/Canada:
International:
YES
•Proceed to step 4.
4.Is the “Speed” LED illuminated on a port with
NO
•Check the copper cables for proper connection.
•Contact Technical Support: US/Canada:
International:
YES
•Amber = The media converter has selected 10Mb/s operation.
•Green = The media converter has selected 100Mb/s operation.
•If the speed is not correct, disconnect and reconnect the twisted pair cable to restart the initialization process.
•Contact Technical Support: US/Canada:
International:
Compliance Information
CISPR22/EN55022 Class A + EN55024
CE Mark
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense.
Canadian Regulations
This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
European Regulations
Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten. In diesem Fäll ist der Benutzer für Gegenmaßnahmen verantwortlich.
Attention! Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques appropriées.
VCCI Class 1 Compliance
This equipment is in the 1st Class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in commercial and/or industrial areas. When used in a residential area or in an adjacent area thereto, interference may be caused to radio and TV receivers, etc. Read the instructions for correct handling.
CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.
Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG- Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.
14 | techsupport@transition.com | 15 |
