Cable Specifications
The cable’s physical characteristics must meet or exceed IEEE 802.3™ specifications.
Copper cable
Category 5: (Minimum Requirement) |
|
Gauge | 24 to 22 AWG |
Attenuation | 22.0 dB /100m @ 100 MHz |
•
•Shielded
•Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
•
•Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
Crossover Cable | |||||||||
|
|
|
|
|
|
|
|
|
|
Twisted Pair #1 | 1 | 1 | Twisted Pair #1 |
| 1 |
|
| 1 |
|
2 | 2 |
| 2 |
|
| 2 |
| ||
|
|
|
|
|
| ||||
Twisted Pair #2 | 3 | 3 | Twisted Pair #2 |
| 3 |
|
| 3 |
|
6 | 6 |
| 6 |
|
| 6 |
| ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
• Do not use flat or silver satin wire. |
|
|
|
|
| ||||
Fiber cable |
|
|
|
|
|
|
|
|
|
Bit Error Rate: |
|
|
|
|
|
|
|
| |
Single mode fiber (recommended): | 9 µm |
|
|
|
|
| |||
Multimode fiber (recommended): | 62.5/125 µm |
|
|
|
|
| |||
Multimode fiber (optional): |
| 100/140, 85/140, 50/125 µm | |||||||
1300 nm multimode |
|
|
| ||||||
min: |
|
| max: | ||||||
min: |
|
| max: | ||||||
Link Budget: |
|
| 11.0 dB |
|
|
|
|
| |
1300 nm multimode |
|
|
| ||||||
min: |
|
| max: | ||||||
min: |
|
| max: | ||||||
Link Budget: |
|
| 11.0 dB |
|
|
|
|
| |
1310 nm single mode | |||||||||
min: |
|
| max: | ||||||
min: |
|
| max: | ||||||
Link Budget: |
|
| 16.0 dB |
|
|
|
|
| |
Cable Specifications -- Continued
1310 nm multimode |
| |
min: | max: | |
min: | max: | |
Link Budget: | 26.0 dB |
|
1310 nm multimode |
| |
min: | max: | |
min: | max: | |
Link Budget: | 29.0 dB |
|
1550 nm single mode | ||
min: | max: | |
min: | max: | |
Link Budget: | 29.0 dB |
|
1310 nm multimode | ||
min: 0.0 dBm | max: | |
min: | max: | |
Link Budget: | 36.0 dB |
|
1310Tx/1550Rx nm single mode | ||
1550Tx/1310Rx nm single mode | ||
min: | max: | |
min: | max: | |
Link Budget: | 19.0 dB |
|
The fiber optic transmitters on this device meet Class I Laser safety requirements per
10 | techsupport@transition.com | 11 |
