Transition Networks SPOEB10XX-100 Installation, Set the configuration switches, Auto-Negotiation

SPOEB10xx-1xx

Part Number	Port One - Copper	Port Two - Duplex Fiber-Optic
	10/100Base-TX	100Base-FX
Single fiber, Installed in pairs
SPOEB1029-100	RJ-45	SC, 1310Tx/1550Rx nm single mode
	100 m (328 ft.)*	20 km (12.4 miles)
SPOEB1029-101	RJ-45	SC, 1550Tx/1310Rx nm single mode
	100 m (328 ft.)*	20 km (12.4 miles)

*Cable distances are the typical maximum distances. Actual distance is dependent upon the physical characteristics of the network installation.

Optional Accessories (sold separately)

Part Number	Description
WMBL	Wall Mount Bracket
	Length: 4.0 in. (102 mm), fits converter length: 4.7 in. (119 mm)
WMBD	DIN Rail Mount Bracket; Length: 5.0 in. (127 mm)
WMBV	Vertical Wall Mount Plate; Length: 5.0 in. (127 mm)

Installation

CAUTION: All installation and service must be performed by qualified service personnel. Read and follow all warning notices and instructions marked on the product and included in this manual.

Set the configuration switches
The configuration switches are located on the side panel of	Switch
the SPOEB10xx-100 media converter. Use a small, flat
	Key
blade screwdriver to set the switches.
		Up Down
8-Position Switch

Eight-position configuration switch

SW1 - Auto-Negotiation TP

SW2 - Speed TP

SW3 - Duplex TP

SW4 - Duplex Fiber

SW5 - AutoCross TP

SW6 - PSE power

SW7 - PSE/LPT power

SW8 - Not used

1 - Auto-Negotiation

Up - Enables Auto-Negotiation.

Down - Disables Auto-Negotiation.

The Auto-Negotiation feature allows the media converter to bring up the copper links to the highest speed and mode possible for all the attached network devices.

1

Auto-Negotiation Enabled

Auto-Negotiation Disabled

2 24-hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 3