Contents
TRENDnet
TEW-410APBplus
Configure the computer’s TCP/IP Settings
Table of Contents
Prepare for Installation
Install Hardware
English
1. Prepare for Installation
Verify Package Contents
Verify Equipment
English
2. Install Hardware
Verify Hardware Installation
English
3. Configure the computer’s TCP/IP Settings
Windows 95/98/98SE/ME
English
6. Click OK
3. Double-Click the Network Connection Icon
Windows 2000/XP
2. Click Start click Settings and then click on Control Panel
1. Find Start button located on Desktop
English
7. Click OK on the Local Area Connection Properties box to close it
English
Mac OS
English
4. Configure the Access Point
From a Wired PC
English
3. The configuration page will appear, then you can make changes on the Access Point to match your existing network’s settings such as IP address and Subnet Mask
English
From a Wireless PC
English
4. The logon pop-up screen will appear, type admin for the username and admin for the password then click OK to access the configuration page
English
6. Scroll down the page to the Wireless section. If you already have a wireless network, change the SSID/Channel or Encryption to match your wireless networks settings
Q3.I cannot connect my wireless PCs to my network
Troubleshooting
Q1. The Access Point will not turn on. None of the LEDs light up
Q2. I cannot get to the configuration page of the TEW-410APBplus
TRENDware, USA
Product Warranty@Registration
TRENDnet
Whats Next in Networking