TRENDnet TEW-410APBplus manual Install Hardware, Verify Hardware Installation, English

2.Install Hardware

1.Connect the RJ-45 network cable from the Access Point to any port on the Hub or Switch.

2.For Wired PC setup, please connect another RJ-45 network cable from the PC to the same Hub or Switch.

3.Connect the AC Power Adapter to the Access Point and to an available power outlet. Turn on the Access Point.

TEW-410APBplusPOWER

3

2

1

Verify Hardware Installation

Verify that the following Access Point LEDs are on.

2 English